How to add files to PTE Patch using Cri Packed File Maker

- REQUIRED SOFTWARE:
Cri Packed File Maker:

After the building is complete, go to ‘PES 2015 installation folderPTEModesOn_Off Mode’ and choose the folder you want, for example “Offline Mode” and open the file ‘DpFileList.bin’ inside with HxD or with the DpFileList Generator by Baris

If you use the HxD see the next step:

It will look like this or similar:

The ‘dt80_100E.cpk’ and ‘dt80_200E.cpk’ entries are the two Data Packs released by Konami, while ‘ptepatch.cpk’ is the base cpk for PTE Patch. If you are using e.g. “Online Mode – Unlicensed”, those entries can differ.

Now select the ‘ptepatch.cpk’ byte array like shown here:

Copy the part and paste it over, like this:

Info: If you are adding multiple cpks, the game will always load the ones later in the list with higher priority; if a file exists in 2 cpks, you will see the one from the cpk that’s lower in the DpFileList.bin.

Edit the text ‘ptepatch.cpk’ to match the name you chose for your .cpk file earlier.

Go the 4th byte and add 1 to it. The byte indicates the number of cpk files the game will read, so if it’s 8 previously, change it to 9 so it also reads your added .cpk.

Now press save the file; the red text will turn black indicating it successfully saved.

Start PES 2015 and check everything ingame.